Author Archives: admin

Install and configure ODBC Drivers on Linux – SLES

We ran into this issue that the proper MS SQL drivers for SLES/PHP are unavailable. There is no phpX-mssql package on the official development media to install, therefore we had to find an alternative solution to access and write data into an MS SQL database from our SLES server.

After some research we decided to set up ODBC on SLES to see if that is working. You need to follow the steps below to install and enable ODBC on your SLES Linux Server.

Install the odbc driver packages from the official SLES 11 Media using zypper.If you do not have a compiler installed also install gcc.

zypper install unixODBC unixODBC-devel gcc

Since there is no freetds package available on the installation media we need to compile that ourselves. Download the installation media from http://www.freetds.org/, upload it to your server and unpack it to a location of your choice. Run the following commands from the directory where you unpacked freedts.

./configure
 make
 make install

Now edit the tds configuration file called freetds.conf. Located in /usr/local/etc/ and add the following to the end of the file end of the file and modify the host, port and version number to your requirements.

[sql-server]
 host = 192.168.0.105
 port = 1433
 tds version = 7.0

Now test if you can connect to the database server. Make sure that the server listens on port 1433 and you have the relevant user id and password.

tsql -S sql-server -U sa -P ********
 locale is "LC_CTYPE=en_US.UTF-8;LC_NUMERIC=C;LC_TIME=C;LC_COLLATE=C;LC_MONETARY=C;LC_MESSAGES=C;LC_PAPER=C;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=C;LC_IDENTIFICATION=C"
 locale charset is "UTF-8"
 using default charset "UTF-8"
 1>

If you do not see any error messages at this stage your connection is working. The next step is to modify the odbc configuration files. First we will do the drivers file. Edit the /etc/unixODBC/odbcinst.ini file by adding the following:

[sql-server]
Description = TDS Connection
Driver = /usr/local/lib/libtdsodbc.so
Setup = /usr/lib64/unixODBC/libtdsS.so
UsageCount = 1
FileUsage = 1

The libtdsodbc.so and libtdsS.so files might be on a different location on your installation check them before you add the lines.

The last step is to add the server information into the odbc.ini file which is located also in /etc/unixODBC directory. Add the following and modify the database name and port if required.

[DsPcDb]
Description = odbc test driver
Driver = sql-server
Servername = sql-server
Database = DsPcDb
UID = sa
Port = 1433

Now run isql to check if your configuration is correct. You have to use the name of the odbc connection after the isql command. In our case this was DsPcDb.

HUITM001-P1:/etc/unixODBC # isql DsPcDb sa *********
+---------------------------------------+
| Connected! |
| |
| sql-statement |
| help [tablename] |
| quit |
| |
+---------------------------------------+
SQL>

If you see the “Connected!” state your setup was successful.

Install PHP DB2 libraries on CentOS

Leave a reply

We came across the requirement to manipulate DB2 using PHP scripts. In order to be able to do that you need to the DB2 libraries installed on your machine. First of all install DB2 Express ( desired version, we used 11.1 ). Make sure you are installing the development libraries with the product as you will need this when you compile the DB2 PHP libraries. Once the server is installed check out the content of the following directory /home/db2inst1/sqllib/include/ if you see a bunch of files in there you have the development pack installed and you are good to go. if you used a different instance name obviously check in there 🙂

The following command sequence will get the rest sorted, we assume you already have php installed on your machine.

yum install php-pear
yum install php-devel
yum install gcc
pecl install ibm_db2

The installer will ask where the DB2 directories are located, just define the directory of your instance. Since we have db2inst1 as the instance the DB2 directory is located at /home/db2inst1/sqllib.

The installer will now compile the PHP libraries. Once it is done just add extension=ibm_db2.so into your php.ini file and you are good to go.

CTRA Server: no transports available, ffffffff. Server shutting down

Leave a reply

We run into the CTRA Server: no transports available, ffffffff Server shutting down issue recently on both our Windows and Linux servers. This might happen when the agent starts and the only communication protocol enabled is ip.spipe. The agent doesn’t connect in fact it shuts down after this error message like in this example:

(59D09A0D.0077-1:kraaumsg.cpp,107,"CTRA_msg_no_transports") CTRA Server: no transports available, ffffffff. Server shutting down
(59D09A0D.0078-1:kraafmn.cpp,787,"kglpsrvr") RegisterHandlers() returned error code: -1!
(59D09A0D.0079-1:kraafmn.cpp,788,"kglpsrvr") Ignoring server start-up request!
(59D09A0D.007A-1:kraaumsg.cpp,143,"CTRA_msg_server_exit_status") CTRA Server:  exit status, ffffffff
(59D09A0D.007B-B:signalmanager.cpp,524,"managerThread") Termination signal received.  Exiting...
(59D09A0D.007C-B:khdxprts.cpp,1760,"KHD_stopStatusMgr")  CTExporterStatus object is unavailable!
(59D09A0D.007D-B:kscqueue.cpp,200,"stop") Successfully stopped Audit worker thread
(59D09A0E.0000-C:kcacmdunx.cpp,273,"executeCmd") Shutdown -- before sleep.
(59D09A0E.0001-C:kcacmdunx.cpp,364,"executeCmd") Shutdown processing.
(59D09A0E.0002-C:kcacmdunx.cpp,264,"executeCmd") Shutdown -- before sleep.
(59D09A0E.0003-C:kcacmdunx.cpp,364,"executeCmd") Shutdown processing.

In both cases the solution is very simple.

Linux / Unix

The issue was due to the fact that our custom certificates expired, once the certificates were re-created, copied across and both the remote TEMS and the Linux OS agent restarted, the problem went away.

Windows

On windows the issue was a missing file after upgrading to Fixpack 7. Once the kdebe.dll file is copied from ITM\TMAITM6_x64 to ITM\GSK8_x64\lib64
the problem was solved.

Agent Builder Agent Workspaces and views are messed up after agent upgrade on TEP

Leave a reply

This issue had us puzzled for weeks. The issue was that whenever we changed anything on one of our Agent Builder Agent even though the TEP support was correctly installed and the new support files downloaded by the TEP javaws client the views were still messed up, wrong order, incorrect titles, etc. The problem was still around after stopping the agent, clearing offline entry and starting the agent and getting it again into TEP. Just like this agent here:

We figured out that the issue is basically that the agent has to be cleared out from EVERY navigator view where it is present. For some reason it is not enough to clear the offline entry from the Physical view you have to delete them from all views. After the agent is gone from all views in question do the following:

Restart the agent from TEP.

Wait until the agent greys out on the console, then select Clear offline entry from the dropdown menu. The agent will now be gone from the Physical view.

Once the agent has been restarted, it pops back in to the TEP console but now with the correct views and workspaces. Now all you have to do is to assign the agent back to its navigator views.

We can summarize that the whole problem was because the agent was present in multiple navigator views…

How to remotely list Vmware VMs using python and turn off SSL certificate verification

Leave a reply

Since we are automating a number of things in our environment there was a need to list vms remotely using a script. We tried using PHP or the vmware vi perl toolkit but we couldn’t make any of them work.

The problem with that PHP script we tried to use was that the SSL certificate on the vcenter host doesn’t match the hostname and even though we tried everything it was impossible to turn the SSL certificate verification off. We tried to use this script:

https://gist.github.com/scr34m/3490246

The problem with the VI perl toolkit was that the toolkit is kind of old and requires libraries that are not available any longer. It also requires perl version 5.8 so we had to install an older perl version parallel with the current one. After a day spent trying to get it working we gave it up.

The last option was to use the VMware vSphere API Python Bindings and the pyvmomi-community-samples. We did the following:

Determine the python version:

Python 2.7.12 (default, Nov 19 2016, 06:48:10)
 [GCC 5.4.0 20160609] on linux2
 Type "help", "copyright", "credits" or "license" for more information.
 >>> import sys
 >>> print (sys.version)
 2.7.12 (default, Nov 19 2016, 06:48:10)
 [GCC 5.4.0 20160609]
 >>>

Since Python 2.7 doesn’t have PIP ( Pip Installs Packages ) installed by default we had to get that downloaded and installed first.

Download get-pip.py from here
python get-pip.py

This installs PIP. Now we need to download and install the vmware python extensions.

pip install pyvmomi

We also need to install git if it is not already installed

apt-get install git

Now install the community samples part. The libraries will be installed into the directory you issue this command from.

git clone https://github.com/vmware/pyvmomi-community-samples.git

Locate and run getallvms.py to list all vms from your vcenter. It is very important that you run this script from the community samples location otherwise it will fail with the following error:

root@zoltan-VirtualBox-kk:/app/images/IPM/python# python getallvms.py
 Traceback (most recent call last):
 File "getallvms.py", line 27, in <module>
 import tools.cli as cli
 ImportError: No module named cli

Run the command using the following syntax:

python getallvms.py -s [vcentername] -u [vmwreuser] -p [vmwarepassword]

If your hostname doesn’t match the certificate you will be getting the error below. If it matches you should be seeing the list of vms now.

Traceback (most recent call last):
 File "getallvms.py", line 104, in <module>
 main()
 File "getallvms.py", line 78, in main
 port=int(args.port),
 File "build/bdist.linux-x86_64/egg/pyVim/connect.py", line 836, in SmartConnect
 File "build/bdist.linux-x86_64/egg/pyVim/connect.py", line 718, in __FindSupportedVersion
 File "build/bdist.linux-x86_64/egg/pyVim/connect.py", line 638, in __GetServiceVersionDescription
 File "build/bdist.linux-x86_64/egg/pyVim/connect.py", line 604, in __GetElementTree
 File "/usr/lib/python2.7/httplib.py", line 1057, in request
 self._send_request(method, url, body, headers)
 File "/usr/lib/python2.7/httplib.py", line 1097, in _send_request
 self.endheaders(body)
 File "/usr/lib/python2.7/httplib.py", line 1053, in endheaders
 self._send_output(message_body)
 File "/usr/lib/python2.7/httplib.py", line 897, in _send_output
 self.send(msg)
 File "/usr/lib/python2.7/httplib.py", line 859, in send
 self.connect()
 File "/usr/lib/python2.7/httplib.py", line 1278, in connect
 server_hostname=server_hostname)
 File "/usr/lib/python2.7/ssl.py", line 353, in wrap_socket
 _context=self)
 File "/usr/lib/python2.7/ssl.py", line 601, in __init__
 self.do_handshake()
 File "/usr/lib/python2.7/ssl.py", line 830, in do_handshake
 self._sslobj.do_handshake()
 ssl.SSLError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:590)

There is no way to switch certificate verification off using a command line parameter so the code has to be changed from:

#!/usr/bin/env python
# VMware vSphere Python SDK
# Copyright (c) 2008-2013 VMware, Inc. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""
Python program for listing the vms on an ESX / vCenter host
"""

import atexit

from pyVim import connect
from pyVmomi import vmodl
from pyVmomi import vim

import tools.cli as cli


def print_vm_info(virtual_machine):
    """
    Print information for a particular virtual machine or recurse into a
    folder with depth protection
    """
    summary = virtual_machine.summary
    print("Name       : ", summary.config.name)
    print("Template   : ", summary.config.template)
    print("Path       : ", summary.config.vmPathName)
    print("Guest      : ", summary.config.guestFullName)
    print("Instance UUID : ", summary.config.instanceUuid)
    print("Bios UUID     : ", summary.config.uuid)
    annotation = summary.config.annotation
    if annotation:
        print("Annotation : ", annotation)
    print("State      : ", summary.runtime.powerState)
    if summary.guest is not None:
        ip_address = summary.guest.ipAddress
        tools_version = summary.guest.toolsStatus
        if tools_version is not None:
            print("VMware-tools: ", tools_version)
        else:
            print("Vmware-tools: None")
        if ip_address:
            print("IP         : ", ip_address)
        else:
            print("IP         : None")
    if summary.runtime.question is not None:
        print("Question  : ", summary.runtime.question.text)
    print("")


def main():
    """
    Simple command-line program for listing the virtual machines on a system.
    """

    args = cli.get_args()

    try:
        service_instance = connect.SmartConnect(host=args.host,
                                                user=args.user,
                                                pwd=args.password,
                                                port=int(args.port))

        atexit.register(connect.Disconnect, service_instance)

        content = service_instance.RetrieveContent()

        container = content.rootFolder  # starting point to look into
        viewType = [vim.VirtualMachine]  # object types to look for
        recursive = True  # whether we should look into it recursively
        containerView = content.viewManager.CreateContainerView(
            container, viewType, recursive)

        children = containerView.view
        for child in children:
            print_vm_info(child)

    except vmodl.MethodFault as error:
        print("Caught vmodl fault : " + error.msg)
        return -1

    return 0

# Start program
if __name__ == "__main__":
    main()

…to the code below. Changes are highlighted with bold ( might not be easy to see at first )

#!/usr/bin/env python
# VMware vSphere Python SDK
# Copyright (c) 2008-2013 VMware, Inc. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""
Python program for listing the vms on an ESX / vCenter host
"""

import atexit
import ssl

from pyVim import connect
from pyVmomi import vmodl
from pyVmomi import vim

import tools.cli as cli


def print_vm_info(virtual_machine):
    """
    Print information for a particular virtual machine or recurse into a
    folder with depth protection
    """
    summary = virtual_machine.summary
    print("Name       : ", summary.config.name)
    print("Template   : ", summary.config.template)
    print("Path       : ", summary.config.vmPathName)
    print("Guest      : ", summary.config.guestFullName)
    print("Instance UUID : ", summary.config.instanceUuid)
    print("Bios UUID     : ", summary.config.uuid)
    annotation = summary.config.annotation
    if annotation:
        print("Annotation : ", annotation)
    print("State      : ", summary.runtime.powerState)
    if summary.guest is not None:
        ip_address = summary.guest.ipAddress
        tools_version = summary.guest.toolsStatus
        if tools_version is not None:
            print("VMware-tools: ", tools_version)
        else:
            print("Vmware-tools: None")
        if ip_address:
            print("IP         : ", ip_address)
        else:
            print("IP         : None")
    if summary.runtime.question is not None:
        print("Question  : ", summary.runtime.question.text)
    print("")


def main():
    """
    Simple command-line program for listing the virtual machines on a system.
    """

    args = cli.get_args()

    try:

        context = ssl.SSLContext(ssl.PROTOCOL_SSLv23)
        context.verify_mode = ssl.CERT_NONE

        service_instance = connect.SmartConnect(host=args.host,
                                                user=args.user,
                                                pwd=args.password,
                                                port=int(args.port),
                                                sslContext=context
)

        atexit.register(connect.Disconnect, service_instance)

        content = service_instance.RetrieveContent()

        container = content.rootFolder  # starting point to look into
        viewType = [vim.VirtualMachine]  # object types to look for
        recursive = True  # whether we should look into it recursively
        containerView = content.viewManager.CreateContainerView(
            container, viewType, recursive)

        children = containerView.view
        for child in children:
            print_vm_info(child)

    except vmodl.MethodFault as error:
        print("Caught vmodl fault : " + error.msg)
        return -1

    return 0

# Start program
if __name__ == "__main__":
    main()

This solution was based on code displayed in this discussion:

https://github.com/vmware/pyvmomi/issues/235

Installing and Configuring the Netcool Omnibus SCOM 2007 Probe

4 Replies

In this article we will install and configure the Netcool Omnibus SCOM 2007 Probe. The probe will be installed on a separate machine and will contact the SCOM server across the network.

The following steps will be performed to achieve the integration:

Install probe support
Install the SCOM probe
Configure the SCOM probe to communicate with the probe server and connect to the Omnibus server
Configure SCOM to work with the probe

We used Netcool Omnibus version 7.4 and Windows 2008 R2 for the operating systems.

Install probe support

Start the installation by executing the install.exe coming with the Netcool Ombibus Server installation image.

Click OK to continue the installation.

Accept the license agreement then click Next to start the configuration of the Autonomic Deployment Engine.

Select Do not change at the Deployment Engine Access Permission windows and click Next to continue the installation.

Select the Destination Folder and click Next to continue. We used the default folder offered.

Select Custom at the Install Set selection and click Next.

Select Probe Support only and continue the installation by clicking the Next button.

Click Install to kick off the installation procedure.

Reboot your windows system to finalize the installation.

Install the SCOM probe

Unpack the probe zip file into a directory of your choice.

Start the nco_install_integration.vbs located in C:\IBM\Tivoli\Netcool\omnibus\install if you used the default omnibus installation folder.

Click OK to continue the installation.

Locate the directory where you unpacked the probe file. You need to specify the directory that contains the COI directory then click Next.

Accept the License Agreement at the next screen then click Install to start the installation of the SCOM probe.

The installation of the SCOM probe is now complete.

Configure the SCOM probe to communicate with the probe server and connect to the Omnibus server

As a first step you need to specify your omnibus servers in the server editor.

You can start the server editor by going to the Start Menu -> Netcool Suite -> System Utilities -> Servers Editor

Add your object servers on the list in the server editor, you can delete whatever you find there by default as it is irrelevant for the current setup.

The next step is to move the SCOM SDK files from the SCOM Server to the probe machine. You will need to have the copy the following files in the following directories:

C:\Program Files\System Center Operations Manager 2007\SDK Binaries\BinariesMicrosoft.EnterpriseManagement.OperationsManager.dll
C:\Program Files\System Center Operations Manager 2007\SDK Binaries\Microsoft.EnterpriseManagement.OperationsManager.Common.dll

The following task is to modify the probe’s configuration file.The probe files are located in C:\IBM\Tivoli\Netcool\omnibus\probes\win32 directory if you used the default installation folder. Modify the scom2007r2.props file by adding the following:

Server                        :       “AGG_P”
ServerBackup                  :       “AGG_B”
ConnectorName                   :       “Netcool probe”
ConnectorUser                   :       “youruser”
ConnectorPassword               :       “yourpassword”
ConnectorDomain               :       “yourdomain”
ScomHost                       :       “your_scom_hostname_or_ip”

Now you should start the probe with the following command: C:\IBM\Tivoli\Netcool\omnibus\probes\win32\nco_p_scom2007_r2.exe If the probe stays running that means it has successfully connected to both the Object server and the SCOM 2007 Server.

Configure SCOM to work with the probe

Once the probe connects to the SCOM server successfully it will create the Netcool Probe product connector.

We set up a group called netcool and assigned 2 Windows 2008 servers to it.

If you need to filter on what nodes or events should hit the Probe, you can do so by setting up a groups and assigning them to the Netcool probe connector. Click on the Add button.

Assign a name to the Subscription then click Next.

Select “netcool” from the groups list then click Next.

Leave the default option at the approve targets screen and click Next.

Select the desired items you would like to have alerts raised for and click Create.

The subscription is now created and the events should start flowing across to Omnibus.

malloc(): memory corruption at DB2 installation on CentOS or Suse Linux

Leave a reply

I spent quite a few hours to figure out what caused this error message. This appeared when I started db2setup on either OpenSUSE or CentOS. The error refers to a memory leak when in reality it is related to the location of the installer.

if the installer is located on a mounted filesystem this problem occurs.
If I copy the installation bundle locally to the server and kick off the installation from there it works without an error.

So before you go any further try copying the installation images locally to the server and see if it solves the issue.

The error message I got is shown below:

# ./db2setup
DBI1190I db2setup is preparing the DB2 Setup wizard which will guide
you through the program setup process. Please wait.

*** Error in `/tmp/db2.tmp.12752/db2/linuxamd64/install/../java/jre/bin/java’: malloc(): memory corruption: 0x00007fbbe0b142b0 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libstdc++.so.6(_Znwm+0x1d)[0x7fbbcc7620ad]
./libdb2ure.so(_ZN7UREInfo12setMsgTokensEPK14MsgTokenHolder+0x33)[0x7fbbcc146443]
./libdb2ure.so(_ZN7UREInfo9setVitalsEiPKciliP14MsgTokenHolderji+0x85)[0x7fbbcc146375]
./libdb2ure.so(_ZN7UREInfoC1EiPKciliP14MsgTokenHolderji+0x6b)[0x7fbbcc14665b]
./libdb2ure.so(_Z11ureSendInfoiPKciiiP14MsgTokenHolderij+0x43)[0x7fbbcc10d1e3]
./libdb2ure.so(_ZN11GPFSFileset9initLevelEbPcb+0xa4e)[0x7fbbcc28305e]
./libdb2ure.so(_ZN11GPFSFileset8initSpecEb+0x204)[0x7fbbcc283ea4]
./libdb2ure.so(_ZN11GPFSFileset12setInstalledEv+0x35)[0x7fbbcc27d5e5]
./libdb2ure.so(_ZN11FilesetList18setExternInstalledEv+0x82)[0x7fbbcc274e52]
./libdb2ure.so(_ZN14FilesetUtility10scanSystemEv+0x2fb)[0x7fbbcc26104b]
./libdb2ure.so(_ZN11FilesetList4initEv+0x338)[0x7fbbcc27ac98]
./libdb2ure.so(_ZN11FilesetList11getInstanceEv+0x139)[0x7fbbcc2780e9]
./libdb2ure.so(_Z14PIResetAllOnCDv+0xb)[0x7fbbcc26d04b]
./libdb2ure.so(_ZN14FilesetUtility9scanMediaEPKc+0x544)[0x7fbbcc263474]
./libdb2ure.so(_ZN14FilesetUtility13getImgVersionEv+0x33)[0x7fbbcc265dc3]
./libdb2ure.so(Java_com_ibm_db2_install_core_DB2Copy_getInstalledDB2CopyObjsNative+0x41)[0x7fbbcc1cf651]
/tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/default/libj9vm26.so(+0x33070)[0x7fbbe480b070]
======= Memory map: ========
00010000-00011000 rw-p 00000000 00:00 0
00400000-00401000 r-xp 00000000 fd:00 67754603                           /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/bin/java
00500000-00501000 rw-p 00000000 fd:00 67754603                           /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/bin/java
021c4000-021e5000 rw-p 00000000 00:00 0                                  [heap]
7fbbac000000-7fbbac0fc000 rw-p 00000000 00:00 0
7fbbac0fc000-7fbbb0000000 —p 00000000 00:00 0
7fbbb0000000-7fbbb008f000 rw-p 00000000 00:00 0
7fbbb008f000-7fbbb4000000 —p 00000000 00:00 0
7fbbb4000000-7fbbb4021000 rw-p 00000000 00:00 0
7fbbb4021000-7fbbb8000000 —p 00000000 00:00 0
7fbbb8000000-7fbbb8021000 rw-p 00000000 00:00 0
7fbbb8021000-7fbbbc000000 —p 00000000 00:00 0
7fbbbd51b000-7fbbbd523000 r-xp 00000000 fd:00 135419944                  /usr/lib64/libnss_sss.so.2
7fbbbd523000-7fbbbd722000 —p 00008000 fd:00 135419944                  /usr/lib64/libnss_sss.so.2
7fbbbd722000-7fbbbd723000 r–p 00007000 fd:00 135419944                  /usr/lib64/libnss_sss.so.2
7fbbbd723000-7fbbbd724000 rw-p 00008000 fd:00 135419944                  /usr/lib64/libnss_sss.so.2
7fbbbd724000-7fbbbd725000 —p 00000000 00:00 0
7fbbbd725000-7fbbbd765000 rw-p 00000000 00:00 0                          [stack:18095]
7fbbbd765000-7fbbbd7bb000 r-xp 00000000 fd:00 135555513                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libsplashscreen.so
7fbbbd7bb000-7fbbbd8bb000 —p 00056000 fd:00 135555513                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libsplashscreen.so
7fbbbd8bb000-7fbbbd8bc000 rw-p 00056000 fd:00 135555513                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libsplashscreen.so
7fbbbd8bc000-7fbbbd8bf000 rw-p 00000000 00:00 0
7fbbbd8bf000-7fbbbd8f2000 r-xp 00000000 fd:00 135555509                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libjpeg.so
7fbbbd8f2000-7fbbbd9f2000 —p 00033000 fd:00 135555509                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libjpeg.so
7fbbbd9f2000-7fbbbd9f3000 rw-p 00033000 fd:00 135555509                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libjpeg.so
7fbbbd9f3000-7fbbbda09000 r-xp 00000000 fd:00 135555530                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libnet.so
7fbbbda09000-7fbbbdb09000 —p 00016000 fd:00 135555530                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libnet.so
7fbbbdb09000-7fbbbdb0a000 rw-p 00016000 fd:00 135555530                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libnet.so
7fbbbdb0a000-7fbbbdb1a000 r-xp 00000000 fd:00 135555500                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libnio.so
7fbbbdb1a000-7fbbbdc19000 —p 00010000 fd:00 135555500                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libnio.so
7fbbbdc19000-7fbbbdc1a000 rw-p 0000f000 fd:00 135555500                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libnio.so
7fbbbdc1a000-7fbbbdc1b000 —p 00000000 00:00 0
7fbbbdc1b000-7fbbbdc5b000 rw-p 00000000 00:00 0                          [stack:18094]
7fbbbdc5b000-7fbbbdc5c000 —p 00000000 00:00 0
7fbbbdc5c000-7fbbbdc9c000 rw-p 00000000 00:00 0                          [stack:18081]
7fbbbdc9c000-7fbbbdc9d000 —p 00000000 00:00 0
7fbbbdc9d000-7fbbbdcdd000 rw-p 00000000 00:00 0                          [stack:18080]
7fbbbdcdd000-7fbbbdcde000 —p 00000000 00:00 0
7fbbbdcde000-7fbbbdd1e000 rw-p 00000000 00:00 0                          [stack:18079]
7fbbbdd1e000-7fbbbdd23000 r-xp 00000000 fd:00 136347703                  /usr/lib64/libXfixes.so.3.1.0
7fbbbdd23000-7fbbbdf22000 —p 00005000 fd:00 136347703                  /usr/lib64/libXfixes.so.3.1.0
7fbbbdf22000-7fbbbdf23000 r–p 00004000 fd:00 136347703                  /usr/lib64/libXfixes.so.3.1.0
7fbbbdf23000-7fbbbdf24000 rw-p 00005000 fd:00 136347703                  /usr/lib64/libXfixes.so.3.1.0
7fbbbdf24000-7fbbbdf2e000 r-xp 00000000 fd:00 136347751                  /usr/lib64/libXcursor.so.1.0.2
7fbbbdf2e000-7fbbbe12d000 —p 0000a000 fd:00 136347751                  /usr/lib64/libXcursor.so.1.0.2
7fbbbe12d000-7fbbbe12e000 r–p 00009000 fd:00 136347751                  /usr/lib64/libXcursor.so.1.0.2
7fbbbe12e000-7fbbbe12f000 rw-p 0000a000 fd:00 136347751                  /usr/lib64/libXcursor.so.1.0.2
7fbbbe12f000-7fbbbe131000 r-xp 00000000 fd:00 134400335                  /usr/lib64/libfreebl3.so
7fbbbe131000-7fbbbe330000 —p 00002000 fd:00 134400335                  /usr/lib64/libfreebl3.so*** Error in `/tmp/db2.tmp.12752/db2/linuxamd64/install/../java/jre/bin/java’: malloc(): memory corruption: 0x00007fbbe0b142b0 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libc.so.6(open_memstream+0x1a)[0x7fbbe582b99a]
/lib64/libc.so.6(__vsyslog_chk+0x7a)[0x7fbbe58a717a]
/lib64/libc.so.6(+0x75d66)[0x7fbbe582cd66]
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libc.so.6(open_memstream+0x1a)[0x7fbbe582b99a]
/lib64/libc.so.6(__vsyslog_chk+0x7a)[0x7fbbe58a717a]
/lib64/libc.so.6(+0x75d66)[0x7fbbe582cd66]
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libc.so.6(open_memstream+0x1a)[0x7fbbe582b99a]
/lib64/libc.so.6(__vsyslog_chk+0x7a)[0x7fbbe58a717a]
/lib64/libc.so.6(+0x75d66)[0x7fbbe582cd66]
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libc.so.6(open_memstream+0x1a)[0x7fbbe582b99a]
/lib64/libc.so.6(__vsyslog_chk+0x7a)[0x7fbbe58a717a]
/lib64/libc.so.6(+0x75d66)[0x7fbbe582cd66]
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libc.so.6(open_memstream+0x1a)[0x7fbbe582b99a]
/lib64/libc.so.6(__vsyslog_chk+0x7a)[0x7fbbe58a717a]
/lib64/libc.so.6(+0x75d66)[0x7fbbe582cd66]
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libc.so.6(open_memstream+0x1a)[0x7fbbe582b99a]
/lib64/libc.so.6(__vsyslog_chk+0x7a)[0x7fbbe58a717a]
/lib64/libc.so.6(+0x75d66)[0x7fbbe582cd66]
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libc.so.6(open_memstream+0x1a)[0x7fbbe582b99a]
/lib64/libc.so.6(__vsyslog_chk+0x7a)[0x7fbbe58a717a]
/lib64/libc.so.6(+0x75d66)[0x7fbbe582cd66]
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libc.so.6(open_memstream+0x1a)[0x7fbbe582b99a]
/lib64/libc.so.6(__vsyslog_chk+0x7a)[0x7fbbe58a717a]
/lib64/libc.so.6(+0x75d66)[0x7fbbe582cd66]
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libc.so.6(open_memstream+0x1a)[0x7fbbe582b99a]
/lib64/libc.so.6(__vsyslog_chk+0x7a)[0x7fbbe58a717a]
/lib64/libc.so.6(+0x75d66)[0x7fbbe582cd66]
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libc.so.6(open_memstream+0x1a)[0x7fbbe582b99a]
/lib64/libc.so.6(__vsyslog_chk+0x7a)[0x7fbbe58a717a]
/lib64/libc.so.6(+0x75d66)[0x7fbbe582cd66]
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libc.so.6(open_memstream+0x1a)[0x7fbbe582b99a]
/lib64/libc.so.6(__vsyslog_chk+0x7a)[0x7fbbe58a717a]
/lib64/libc.so.6(+0x75d66)[0x7fbbe582cd66]
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libc.so.6(open_memstream+0x1a)[0x7fbbe582b99a]
/lib64/libc.so.6(__vsyslog_chk+0x7a)[0x7fbbe58a717a]
/lib64/libc.so.6(+0x75d66)[0x7fbbe582cd66]
/lib64/libc.so.6(+0x7ebbc)[0x7fbbe5835bbc]
/lib64/libc.so.6(__libc_malloc+0x5c)[0x7fbbe583718c]
/lib64/libc.so.6(open_memstream+0x1a)[0x7fbbe582b99a]
======= Memory map: ========
00010000-00011000 rw-p 00000000 00:00 0
00400000-00401000 r-xp 00000000 fd:00 67754603                           /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/bin/java
00500000-00501000 rw-p 00000000 fd:00 67754603                           /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/bin/java
021c4000-021e5000 rw-p 00000000 00:00 0                                  [heap]
7fbbac000000-7fbbac0fc000 rw-p 00000000 00:00 0
7fbbac0fc000-7fbbb0000000 —p 00000000 00:00 0
7fbbb0000000-7fbbb008f000 rw-p 00000000 00:00 0
7fbbb008f000-7fbbb4000000 —p 00000000 00:00 0
7fbbb4000000-7fbbb4021000 rw-p 00000000 00:00 0
7fbbb4021000-7fbbb8000000 —p 00000000 00:00 0
7fbbb8000000-7fbbb8021000 rw-p 00000000 00:00 0
7fbbb8021000-7fbbbc000000 —p 00000000 00:00 0
7fbbbd51b000-7fbbbd523000 r-xp 00000000 fd:00 135419944                  /usr/lib64/libnss_sss.so.2
7fbbbd523000-7fbbbd722000 —p 00008000 fd:00 135419944                  /usr/lib64/libnss_sss.so.2
7fbbbd722000-7fbbbd723000 r–p 00007000 fd:00 135419944                  /usr/lib64/libnss_sss.so.2
7fbbbd723000-7fbbbd724000 rw-p 00008000 fd:00 135419944                  /usr/lib64/libnss_sss.so.2
7fbbbd724000-7fbbbd725000 —p 00000000 00:00 0
7fbbbd725000-7fbbbd765000 rw-p 00000000 00:00 0                          [stack:18095]
7fbbbd765000-7fbbbd7bb000 r-xp 00000000 fd:00 135555513                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libsplashscreen.so
7fbbbd7bb000-7fbbbd8bb000 —p 00056000 fd:00 135555513                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libsplashscreen.so
7fbbbd8bb000-7fbbbd8bc000 rw-p 00056000 fd:00 135555513                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libsplashscreen.so
7fbbbd8bc000-7fbbbd8bf000 rw-p 00000000 00:00 0
7fbbbd8bf000-7fbbbd8f2000 r-xp 00000000 fd:00 135555509                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libjpeg.so
7fbbbd8f2000-7fbbbd9f2000 —p 00033000 fd:00 135555509                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libjpeg.so
7fbbbd9f2000-7fbbbd9f3000 rw-p 00033000 fd:00 135555509                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libjpeg.so
7fbbbd9f3000-7fbbbda09000 r-xp 00000000 fd:00 135555530                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libnet.so
7fbbbda09000-7fbbbdb09000 —p 00016000 fd:00 135555530                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libnet.so
7fbbbdb09000-7fbbbdb0a000 rw-p 00016000 fd:00 135555530                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libnet.so
7fbbbdb0a000-7fbbbdb1a000 r-xp 00000000 fd:00 135555500                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libnio.so
7fbbbdb1a000-7fbbbdc19000 —p 00010000 fd:00 135555500                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libnio.so
7fbbbdc19000-7fbbbdc1a000 rw-p 0000f000 fd:00 135555500                  /tmp/db2.tmp.12752/db2/linuxamd64/java/jre/lib/amd64/libnio.so
7fbbbdc1a000-7fbbbdc1b000 —p 00000000 00:00 0
7fbbbdc1b000-7fbbbdc5b000 rw-p 00000000 00:00 0                          [stack:18094]
/tmp/db2.tmp.12752/db2/linuxamd64/install//db2setup_exec: line 592: 18068 Aborted                 (core dumped) ${DB2INSTALLER?} ${DB2OPTS?} 2> ${ERRFILE?}

Installing IBM Tivoli Monitoring 6.3.0.3 on CentOS 7

5 Replies

As proof of concept today we are going to try to install IBM Tivoli Monitoring 6.3.0.3 on CentOS 7 which should be identical as the Red Hat Linux Server 7 ( RHEL ). We installed the 64bit version of CentOS using the KDE option on a virtual box VM. The Software Compatibility Matrix provided by IBM states a good couple of prerequisites. We installed these prereq. software and added a few on our own to make sure that the installation goes through without any problem.

Set the ip and the hostname in the /etc/hosts file. Either set up static ip or make sure that the DHCP rolls you the same ip all the time.

The following software was installed before the installation as a prerequsite:

The GNU C Library 32bit version this is required by GSkit to install correctly.
yum install glibc.i686

Korn Shell latest version, this is needed by the installer to run correctly.
yum install ksh

This package contains the pamlib.so which is required by the installer.
yum install pam.x86_64

In case you do not have the X installed on your CentOS box:

yum install libX11.x86_64
yum install libXfixes.x86_64
yum install libXi.x86_64

We needed all libstdc ( both 64 and 32 bit ones ) and all compat-libstdc++ ( 32 bit and 64 bit ones as well )

We performed a search to find the latest libraries…

-sh-4.2# yum search libstdc
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
* base: centos.mirroraustria.at
* extras: centos.mirroraustria.at
* updates: ftp.freepark.org
=========================================================================================================== N/S matched: libstdc ============================================================================================================
compat-libstdc++-33.i686 : Compatibility standard C++ libraries
compat-libstdc++-33.x86_64 : Compatibility standard C++ libraries
libstdc++.i686 : GNU Standard C++ Library
libstdc++.x86_64 : GNU Standard C++ Library
libstdc++-devel.i686 : Header files and libraries for C++ development
libstdc++-devel.x86_64 : Header files and libraries for C++ development
libstdc++-docs.x86_64 : Documentation for the GNU standard C++ library
libstdc++-static.i686 : Static libraries for the GNU standard C++ library
libstdc++-static.x86_64 : Static libraries for the GNU standard C++ library

Name and summary matches only, use “search all” for everything.

… and performed the installation

yum install compat-libstdc++-33.i686
yum install compat-libstdc++-33.x86_64
yum install libstdc++.i686
yum install libstdc++.x86_64

We also needed to disable SeLinux as a prereq. by the installer. Edit vim /etc/sysconfig/selinux file and set the SELINUX parameter to disabled as shown below:

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing – SELinux security policy is enforced.
#     permissive – SELinux prints warnings instead of enforcing.
#     disabled – No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three two values:
#     targeted – Targeted processes are protected,
#     minimum – Modification of targeted policy. Only selected processes are protected.
#     mls – Multi Level Security protection.
SELINUXTYPE=targeted

Now all the required packages and libraries are installed we can go ahead and start the installation:

setarch $(uname -m) –uname-2.6

This command will put in a special shell where uname -r will show 2.6.xxx as a kernel version. Be prepared that all the prereq. checks will fail as CentOS is not a supported platform luckily you can still install the product regardless the failed prereqs.

As a base installation we will use the IBM Tivoli Monitoring 6.3.0.2 installation bundle then upgrade to 6.3.0.3 as there is no 6.3.0.3 stand alone installation package exists yet.

Now start the installation using the install.sh command:

-sh-4.2# ./install.sh
INSTALL

Enter the name of the IBM Tivoli Monitoring directory
[ default = /opt/IBM/ITM ]: /app/IBM/ITM

ITM home directory “/app/IBM/ITM” already exists.
OK to use it [ 1-yes, 2-no; “1” is default ]?

KCI1362W IBM Tivoli Monitoring version 6.3 introduces a number of platform improvements which may require operating system updates. It is important that you ensure this system meets these requirements prior to installing or updating your installation. Please refer to the following technote for more information: http://www.ibm.com/support/docview.wss?uid=swg21623341

Select one of the following:

1) Install products to the local host.
2) Install products to depot for remote deployment (requires TEMS).
3) Install TEMS support for remote seeding
4) Exit install.

Please enter a valid number: 1

Initializing …
Prerequisite scanning for JRE failed:
FAIL       Tivoli Enterprise-supplied JRE   /app/IBM/ITM/logs/prereqscan/20151014-141724/KJR/result.txt
Property               Result       Found                   Expected
============================================================================================================
OS Version                              FAIL            CentOS Linux release 7.1.1503 (Core…     AIX V6.*

Continue with this installation [1-yes, 2-no; “2” is default ]? 1
International Program License Agreement

Part 1 – General Terms

BY DOWNLOADING, INSTALLING, COPYING, ACCESSING, CLICKING ON
AN “ACCEPT” BUTTON, OR OTHERWISE USING THE PROGRAM,
LICENSEE AGREES TO THE TERMS OF THIS AGREEMENT. IF YOU ARE
ACCEPTING THESE TERMS ON BEHALF OF LICENSEE, YOU REPRESENT
AND WARRANT THAT YOU HAVE FULL AUTHORITY TO BIND LICENSEE
TO THESE TERMS. IF YOU DO NOT AGREE TO THESE TERMS,

* DO NOT DOWNLOAD, INSTALL, COPY, ACCESS, CLICK ON AN
“ACCEPT” BUTTON, OR USE THE PROGRAM; AND

* PROMPTLY RETURN THE UNUSED MEDIA, DOCUMENTATION, AND

Press Enter to continue viewing the license agreement, or
enter “1” to accept the agreement, “2” to decline it, “3”
to print it, “4” to read non-IBM terms, or “99” to go back
to the previous screen.
1

Product packages are available in /mnt/downloads/TIVOLI-IMAGES/itm6.3.0.2-LNX64/unix

The following products are currently installed in “/app/IBM/ITM”:

IBM GSKit Security Interface V08.00.50.05 @ Linux x86_64 R2.6, R3.0 (64 bit)

All agents require that application support files that contain agent-specific information be installed on the Tivoli Enterprise Monitoring Server that the agents will connect to, Tivoli Enterprise Portal Server and Tivoli Enterprise Portal desktop and browser client. Install application support before starting to install any Tivoli Enterprise Monitoring Agents.

Product packages are available for this operating system and component support categories:

1) IBM Tivoli Monitoring components for this operating system
2) Tivoli Enterprise Portal Browser Client support
3) Tivoli Enterprise Portal Desktop Client support
4) Tivoli Enterprise Portal Server support
5) Tivoli Enterprise Monitoring Server support
6) Other operating systems

Type the number or type “q” to quit selection
[ number “1” or “IBM Tivoli Monitoring components for this operating system” is default ]: 1

You selected number “1” or “IBM Tivoli Monitoring components for this operating system”

Is the selection correct [ 1=Yes, 2=No ; default is “1” ] ? 1

The following products are available for installation:

1) Summarization and Pruning Agent V06.30.02.00
2) Tivoli Enterprise Monitoring Automation Server V06.30.02.00
3) Tivoli Enterprise Monitoring Server V06.30.02.00
4) Tivoli Enterprise Portal Desktop Client V06.30.02.00
5) Tivoli Enterprise Portal Server V06.30.02.00
6) Tivoli Enterprise Services User Interface Extensions V06.30.02.00
7) Tivoli Performance Analyzer V06.30.02.00
8) Warehouse Proxy V06.30.02.00
9) all of the above

Type the numbers that correspond to the products that you want to install. Type “b” to change operating system, or type “q” to quit selection.
If you enter more than one number, separate the numbers by a comma or a space.

Type your selections here: 9

The following products will be installed:

Summarization and Pruning Agent V06.30.02.00
Tivoli Enterprise Monitoring Automation Server V06.30.02.00
Tivoli Enterprise Monitoring Server V06.30.02.00
Tivoli Enterprise Portal Desktop Client V06.30.02.00
Tivoli Enterprise Portal Server V06.30.02.00
Tivoli Enterprise Services User Interface Extensions V06.30.02.00
Tivoli Performance Analyzer V06.30.02.00
Warehouse Proxy V06.30.02.00

Are your selections correct [ 1=Yes, 2=No ; default is “1” ] ? 1

Do you want to check prerequisites for the above components? [ 1=Yes, 2=No ; default is “1” ] ? 1
Running Prerequisite Scanner.
This may take a few minutes depending on the number of components being checked and the machine’s performance.
Prerequisite Scanner results for the selected components:
FAIL   Tivoli Enterprise Monitoring Automation Server       /app/IBM/ITM/logs/prereqscan/20151014-141755/COMMON/result.txt
FAIL   IBM Tivoli Monitoring Shared Libraries       /app/IBM/ITM/logs/prereqscan/20151014-141755/COMMON/result.txt
FAIL   Tivoli Enterprise Portal Desktop Client       /app/IBM/ITM/logs/prereqscan/20151014-141755/COMMON/result.txt
FAIL   Tivoli Enterprise Portal Server       /app/IBM/ITM/logs/prereqscan/20151014-141755/COMMON/result.txt
FAIL   IBM GSKit Security Interface       /app/IBM/ITM/logs/prereqscan/20151014-141755/COMMON/result.txt
FAIL   Warehouse Proxy       /app/IBM/ITM/logs/prereqscan/20151014-141755/COMMON/result.txt
FAIL   Tivoli Enterprise-supplied JRE       /app/IBM/ITM/logs/prereqscan/20151014-141755/COMMON/result.txt
FAIL   Tivoli Enterprise Monitoring Server       /app/IBM/ITM/logs/prereqscan/20151014-141755/COMMON/result.txt
FAIL   Tivoli Performance Analyzer       /app/IBM/ITM/logs/prereqscan/20151014-141755/COMMON/result.txt
FAIL   Summarization and Pruning Agent       /app/IBM/ITM/logs/prereqscan/20151014-141755/COMMON/result.txt
FAIL   Tivoli Enterprise Services User Interface Extensions       /app/IBM/ITM/logs/prereqscan/20151014-141755/COMMON/result.txt

FAIL Prerequisite Scanner Overall Result /app/IBM/ITM/logs/prereqscan/20151014-141755/COMMON/result.txt

Do you want to continue with the installation [ 1=Yes, 2=No ; default is “2” ] ? 1

Installing IBM Global Security Toolkit

… installing “Summarization and Pruning Agent V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Summarization and Pruning Agent V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Summarization and Pruning Agent V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit).
… Summarization and Pruning Agent V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Tivoli Enterprise Monitoring Automation Server V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Tivoli Enterprise Monitoring Automation Server V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Tivoli Enterprise Monitoring Automation Server V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit).
… Tivoli Enterprise Monitoring Automation Server V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Tivoli Enterprise Monitoring Server V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Tivoli Enterprise Monitoring Server V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Tivoli Enterprise Monitoring Server V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit).

Please enter TEMS name [ TEMS is default ]: hurefcos001
… creating config file “/app/IBM/ITM/config/ms.config”
… creating file “/app/IBM/ITM/tables/hurefcos001/glb_site.txt.”
… updating “/app/IBM/ITM/config/kbbenv”
… verifying Hot Standby.
… Tivoli Enterprise Monitoring Server V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Tivoli Enterprise Portal Desktop Client V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Tivoli Enterprise Portal Desktop Client V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Tivoli Enterprise Portal Desktop Client V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit).
… Tivoli Enterprise Portal Desktop Client V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Tivoli Enterprise Portal Server V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

IBM Eclipse Help Server will be installed as a prerequisite to Tivoli Enterprise Portal Server.

=> installed “Tivoli Enterprise Portal Server V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Tivoli Enterprise Portal Server V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit).
Tivoli Enterprise Portal server configuration was updated to reflect Eclipse Help Server configuration changes.
… Tivoli Enterprise Portal Server V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Tivoli Enterprise Services User Interface Extensions V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Tivoli Enterprise Services User Interface Extensions V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Tivoli Enterprise Services User Interface Extensions V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit).
… Tivoli Enterprise Services User Interface Extensions V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Tivoli Performance Analyzer V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Tivoli Performance Analyzer V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Tivoli Performance Analyzer V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit).
… Tivoli Performance Analyzer V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Warehouse Proxy V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Warehouse Proxy V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Warehouse Proxy V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit).
… Warehouse Proxy V06.30.02.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

If you are installing Tivoli Enterprise Portal Server (TEPS) or Tivoli Enterprise Portal Desktop Client (TEP) for the first time you will probably want to install product support to the TEPS and TEP for the agent products which you plan to use. This gives you product specific function within the TEP. To install support packages choose yes below or run the install again at a later time and when prompted to choose an operating system or component support category choose the appropriate support category.

Do you want to install additional products or product support packages [ 1=Yes, 2=No ; default is “2” ] ? 2
… postprocessing; please wait.
… finished postprocessing.
Installation step complete.

Following Tivoli Enterprise Monitoring Server product support were installed:
*) Monitoring Agent for IBM Tivoli Monitoring 5.x Endpoint
*) Warehouse Proxy
*) Monitoring Agent for i5/OS
*) Monitoring Agent for UNIX OS
*) Monitoring Agent for Windows OS
*) Tivoli Performance Analyzer
*) Tivoli Enterprise Monitoring Server
*) Summarization and Pruning Agent
*) Monitoring Agent for UNIX Logs
*) Universal Agent
*) Agentless Monitoring for Windows Operating Systems
*) Monitoring Agent for Linux OS
*) Agentless Monitoring for AIX Operating Systems
*) Agentless Monitoring for Linux Operating Systems
*) Agentless Monitoring for HP-UX Operating Systems
*) Agentless Monitoring for Solaris Operating Systems

Note: This operation causes the monitoring server to restart.
Do you want to seed product support on the Tivoli Enterprise Monitoring Server? [ 1=Yes, 2=No ; default is “1” ] ? 1
Starting TEMS…
TEMS started…

The following new Tivoli Enterprise Monitoring Server product support packages will be seeded:
*) Monitoring Agent for IBM Tivoli Monitoring 5.x Endpoint
*) Warehouse Proxy
*) Monitoring Agent for i5/OS
*) Monitoring Agent for UNIX OS
*) Monitoring Agent for Windows OS
*) Tivoli Performance Analyzer
*) Summarization and Pruning Agent
*) Monitoring Agent for UNIX Logs
*) Universal Agent
*) Agentless Monitoring for Windows Operating Systems
*) Monitoring Agent for Linux OS
*) Agentless Monitoring for AIX Operating Systems
*) Agentless Monitoring for Linux Operating Systems
*) Agentless Monitoring for HP-UX Operating Systems
*) Agentless Monitoring for Solaris Operating Systems

The following previously seeded Tivoli Enterprise Monitoring Server product support packages will be re-seeded:
*) Tivoli Enterprise Monitoring Server

Choose one of the following options to add or update the situation distribution definition to include the default managed system groups:

1) ALL – This option adds the default managed system groups to all the applicable situations. Note that not all situations have the default managed group setting. For some, you might need to manually define the distribution in the Tivoli Enterprise Portal due to the specific content of the agent support package.
2) NONE – The default managed system group is not added to any situation.
3) NEW – This option adds the default managed system groups to all applicable situations from the product support packages that are being seeded for the first time. Note that not all situations have the default managed group setting. For some, you might need to manually define the distribution in the Tivoli Enterprise Portal due to the specific content of the agent support package. Modifications are not made to managed system groups in upgraded product support packages.

Type your selections here [ number “3” or “NEW” is default ]:
1

Seeding support for Monitoring Agent for IBM Tivoli Monitoring 5.x Endpoint [1 of 16]
Product support seeding completed…
Seeding support for Warehouse Proxy [2 of 16]
Product support seeding completed…
Seeding support for Monitoring Agent for i5/OS [3 of 16]
Product support seeding completed…
Seeding support for Monitoring Agent for UNIX OS [4 of 16]
Product support seeding completed…
Seeding support for Monitoring Agent for Windows OS [5 of 16]
Product support seeding completed…
Seeding support for Tivoli Performance Analyzer [6 of 16]
Product support seeding completed…
Seeding support for Tivoli Enterprise Monitoring Server [7 of 16]
Product support seeding completed…
Seeding support for Summarization and Pruning Agent [8 of 16]
Product support seeding completed…
Seeding support for Monitoring Agent for UNIX Logs [9 of 16]
Product support seeding completed…
Seeding support for Universal Agent [10 of 16]
Product support seeding completed…
Seeding support for Agentless Monitoring for Windows Operating Systems [11 of 16]
Product support seeding completed…
Seeding support for Monitoring Agent for Linux OS [12 of 16]
Product support seeding completed…
Seeding support for Agentless Monitoring for AIX Operating Systems [13 of 16]
Product support seeding completed…
Seeding support for Agentless Monitoring for Linux Operating Systems [14 of 16]
Product support seeding completed…
Seeding support for Agentless Monitoring for HP-UX Operating Systems [15 of 16]
Product support seeding completed…
Seeding support for Agentless Monitoring for Solaris Operating Systems [16 of 16]
Product support seeding completed…
Stopping TEMS…
TEMS stopped…
All supports successfully seeded.

You may now configure any locally installed IBM Tivoli Monitoring product via the “/app/IBM/ITM/bin/itmcmd config” command.

Automatic start at system initialization has been configured.
Automatic stop at system shutdown has been configured.

The install.sh command creates most of directories and files with world write permissions. IBM Tivoli Monitoring provides the secureMain utility to helps you keep the monitoring environment secured. You can secure this installation now or manually execute the secureMain utility later. For more information see Appendix G. Securing your IBM Tivoli Monitoring installation on Linux or UNIX in the IBM Tivoli Monitoring Installation and Setup Guide.

Do you want to secure this IBM Tivoli Monitoring installation [ 1-yes, 2-no; “2” is default ]?

After the installation we have started the Manage Tivoli Enterprise Montoring Services, configured the Server as HUB TEMS and started it.

Applying IBM Tivoli Monitoring 6.3.0.3 ( Fix Pack 3 ) on Cent OS7

The next step is to apply Fixpack 3 on the current ITM ( 6.3.0.2 ) level. Locate the 6.3.0.3 installation directory and kick off the installation with the install.sh installer script.

-sh-4.2# ./install.sh
UPGRADE

Enter the name of the IBM Tivoli Monitoring directory
[ default = /opt/IBM/ITM ]: /app/IBM/ITM

ITM home directory “/app/IBM/ITM” already exists.
OK to use it [ 1-yes, 2-no; “1” is default ]? 1

The Manage Tivoli Enterprise Monitoring Services is running in the background, please close it before continuing.
Continue with this installation [ 1-yes, 2-no; “1” is default ]? 1

The following processes are currently running:

Product = Tivoli Enterprise Monitoring Server PID = 19904
install.sh warning: Existing products found to be running will be restarted during installation., continuing …

Continue with this installation [ 1-yes, 2-no; “1” is default ]? 1
Stopping TEMS…
It can take up to ten minutes.
TEMS stopped…
/app/IBM/ITM

Select one of the following:

1) Install products to the local host.
2) Install products to depot for remote deployment (requires TEMS).
3) Install TEMS support for remote seeding
4) Exit install.

Please enter a valid number: 1

Initializing …
Prerequisite scanning for JRE failed:
FAIL       Tivoli Enterprise-supplied JRE   /app/IBM/ITM/logs/prereqscan/20151014-145153/KJR/result.txt
Property               Result       Found                   Expected
============================================================================================================
OS Version                              FAIL            CentOS Linux release 7.1.1503 (Core…     regex{AIX V[67].*}

Continue with this installation [1-yes, 2-no; “2” is default ]? 1
International Program License Agreement

Part 1 – General Terms

* DO NOT DOWNLOAD, INSTALL, COPY, ACCESS, CLICK ON AN
“ACCEPT” BUTTON, OR USE THE PROGRAM; AND

* PROMPTLY RETURN THE UNUSED MEDIA, DOCUMENTATION, AND

Product packages are available in /mnt/downloads/TIVOLI-IMAGES/itm6.3.0.3-LNX64/unix

The following products are currently installed in “/app/IBM/ITM”:

IBM Eclipse Help Server V06.30.02.00 @ Linux Intel R2.6, R3.0 (32 bit)/Intel R2.6 GCC 2.9.5 (64 bit)/Intel R2.6, R3.0 (64 bit)/x86_64 R2.6, R3.0 (32 bit)/x86_64 R2.6, R3.0 (64 bit)
IBM GSKit Security Interface V08.00.50.05 @ Linux Intel R2.4 (32 bit)/Intel R2.6, R3.0 (32 bit)/x86_64 R2.6, R3.0 (32 bit)
IBM GSKit Security Interface V08.00.50.05 @ Linux x86_64 R2.6, R3.0 (64 bit)
IBM HTTP Server V08.00.06.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
IBM Installation Manager V01.06.03.01 @ Linux x86_64 R2.6, R3.0 (64 bit)
IBM Tivoli Enterprise Portal Server Extensions V08.00.06.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Summarization and Pruning Agent V06.30.02.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Monitoring Automation Server V06.30.02.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Monitoring SOAP Server V06.30.02.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Monitoring Server V06.30.02.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Portal Browser Client V06.30.02.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Portal Desktop Client V06.30.02.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Portal Server V06.30.02.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Services User Interface Extensions V06.30.02.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Services User Interface V06.30.02.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Performance Analyzer V06.30.02.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Warehouse Proxy V06.30.02.00 @ Linux x86_64 R2.6, R3.0 (64 bit)

Product packages are available for this operating system and component support categories:

Type the number or type “q” to quit selection
[ number “1” or “IBM Tivoli Monitoring components for this operating system” is default ]: 1

You selected number “1” or “IBM Tivoli Monitoring components for this operating system”

Is the selection correct [ 1=Yes, 2=No ; default is “1” ] ? 1

The following products are available for installation:

1) Summarization and Pruning Agent V06.30.03.00
2) Tivoli Enterprise Monitoring Automation Server V06.30.03.00
3) Tivoli Enterprise Monitoring Server V06.30.03.00
4) Tivoli Enterprise Portal Desktop Client V06.30.03.00
5) Tivoli Enterprise Portal Server V06.30.03.00
6) Tivoli Enterprise Services User Interface Extensions V06.30.03.00
7) Tivoli Performance Analyzer V06.30.03.00
8) Warehouse Proxy V06.30.03.00
9) all of the above

Type your selections here: 9

The following products will be installed:

Summarization and Pruning Agent V06.30.03.00
Tivoli Enterprise Monitoring Automation Server V06.30.03.00
Tivoli Enterprise Monitoring Server V06.30.03.00
Tivoli Enterprise Portal Desktop Client V06.30.03.00
Tivoli Enterprise Portal Server V06.30.03.00
Tivoli Enterprise Services User Interface Extensions V06.30.03.00
Tivoli Performance Analyzer V06.30.03.00
Warehouse Proxy V06.30.03.00

Are your selections correct [ 1=Yes, 2=No ; default is “1” ] ? 1

Do you want to check prerequisites for the above components? [ 1=Yes, 2=No ; default is “1” ] ? 2

Installing IBM Global Security Toolkit

Installing prerequisite components

… installing package “axlx8266”; please wait.

=> installed package “axlx8266”.
… installing package “uilx8266”; please wait.

=> installed package “uilx8266”.
… installing package “uelx8266”; please wait.

=> installed package “uelx8266”.
… installing package “shlx8266”; please wait.

=> installed package “shlx8266”.
… installing package “axli6263”; please wait.

=> installed package “axli6263”.
… installing package “jrli6263”; please wait.

=> installed package “jrli6263”.
… installing package “cwlx8266”; please wait.

=> installed package “cwlx8266”.
… installing package “kfli6263”; please wait.

=> installed package “kfli6263”.

… installing “Summarization and Pruning Agent V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Summarization and Pruning Agent V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Summarization and Pruning Agent V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit).
… Summarization and Pruning Agent V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Tivoli Enterprise Monitoring Automation Server V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Tivoli Enterprise Monitoring Automation Server V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Tivoli Enterprise Monitoring Automation Server V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit).
… Tivoli Enterprise Monitoring Automation Server V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Tivoli Enterprise Monitoring Server V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Tivoli Enterprise Monitoring Server V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Tivoli Enterprise Monitoring Server V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit).

The following TEMS are installed in /app/IBM/ITM:
hurefcos001
… creating config file “/app/IBM/ITM/config/ms.config”
… creating file “/app/IBM/ITM/tables/hurefcos001/glb_site.txt.”
… updating “/app/IBM/ITM/config/kbbenv”
… verifying Hot Standby.
… Tivoli Enterprise Monitoring Server V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Tivoli Enterprise Portal Desktop Client V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Tivoli Enterprise Portal Desktop Client V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Tivoli Enterprise Portal Desktop Client V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit).
… Tivoli Enterprise Portal Desktop Client V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Tivoli Enterprise Portal Server V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Tivoli Enterprise Portal Server V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Tivoli Enterprise Portal Server V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit).
Tivoli Enterprise Portal server configuration was updated to reflect Eclipse Help Server configuration changes.
… Tivoli Enterprise Portal Server V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Tivoli Enterprise Services User Interface Extensions V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Tivoli Enterprise Services User Interface Extensions V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Tivoli Enterprise Services User Interface Extensions V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit).
… Tivoli Enterprise Services User Interface Extensions V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Tivoli Performance Analyzer V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Tivoli Performance Analyzer V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Tivoli Performance Analyzer V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit).
… Tivoli Performance Analyzer V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

… installing “Warehouse Proxy V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”; please wait.

=> installed “Warehouse Proxy V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit)”.
… Initializing component Warehouse Proxy V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit).
… Warehouse Proxy V06.30.03.00 for Linux x86_64 R2.6, R3.0 (64 bit) initialized.

The following new Tivoli Enterprise Monitoring Server product support packages will be seeded:
*) Tivoli Performance Analyzer

The following previously seeded Tivoli Enterprise Monitoring Server product support packages will be re-seeded:
*) Monitoring Agent for IBM Tivoli Monitoring 5.x Endpoint
*) Warehouse Proxy
*) Monitoring Agent for i5/OS
*) Monitoring Agent for UNIX OS
*) Monitoring Agent for Windows OS
*) Tivoli Enterprise Monitoring Server
*) Summarization and Pruning Agent
*) Monitoring Agent for UNIX Logs
*) Universal Agent
*) Agentless Monitoring for Windows Operating Systems
*) Monitoring Agent for Linux OS
*) Agentless Monitoring for AIX Operating Systems
*) Agentless Monitoring for Linux Operating Systems
*) Agentless Monitoring for HP-UX Operating Systems
*) Agentless Monitoring for Solaris Operating Systems

Choose one of the following options to add or update the situation distribution definition to include the default managed system groups:

Type your selections here [ number “3” or “NEW” is default ]:
1

You may now configure any locally installed IBM Tivoli Monitoring product via the “/app/IBM/ITM/bin/itmcmd config” command.

Automatic start at system initialization has been configured.
Automatic stop at system shutdown has been configured.

Do you want to secure this IBM Tivoli Monitoring installation [ 1-yes, 2-no; “2” is default ]?
Starting TEMS…
It can take up to ten minutes.
TEMS started…
The Warehouse Proxy and/or the Summarization and Pruning agents are not started automatically after the upgrade is completed. Dependent upon the installed agents and the associated attribute groups enabled for historical collection and whether limited database permissions are granted to the warehouse user, a database administrator might need to use the Warehouse Publication Tool to generate a script with the necessary changes for the database. Information regarding these required steps can be found in the IBM Tivoli Monitoring Installation and Setup Guide.
[1]+ Done /app/IBM/ITM/bin/itmcmd manage (wd: /mnt/downloads/TIVOLI-IMAGES/itm6.3.0.2-LNX64)
(wd now: /mnt/downloads/TIVOLI-IMAGES/itm6.3.0.3-LNX64)

As you can see from the following screenshot the installation went well and FP3 was successfully applied.

Applying IBM Tivoli Monitoring 6.3.0.3 Support Packages on CentOS 7

The next step is to apply the the following support packages:

– Tivoli Enterprise Portal Browser Client support
– Tivoli Enterprise Portal Desktop Client support
– Tivoli Enterprise Portal Server support

We restart the 6.3.0.3 installation bundle using ./install.sh

The following products are currently installed in “/app/IBM/ITM”:

IBM Eclipse Help Server V06.30.03.00 @ Linux Intel R2.6, R3.0 (32 bit)/Intel R2.6 GCC 2.9.5 (64 bit)/Intel R2.6, R3.0 (64 bit)/x86_64 R2.6, R3.0 (32 bit)/x86_64 R2.6, R3.0 (64 bit)
IBM GSKit Security Interface V08.00.50.20 @ Linux Intel R2.4 (32 bit)/Intel R2.6, R3.0 (32 bit)/x86_64 R2.6, R3.0 (32 bit)
IBM GSKit Security Interface V08.00.50.20 @ Linux x86_64 R2.6, R3.0 (64 bit)
IBM HTTP Server V08.00.06.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
IBM Installation Manager V01.06.03.01 @ Linux x86_64 R2.6, R3.0 (64 bit)
IBM Tivoli Enterprise Portal Server Extensions V08.00.06.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Summarization and Pruning Agent V06.30.03.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Monitoring Automation Server V06.30.03.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Monitoring SOAP Server V06.30.03.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Monitoring Server V06.30.03.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Portal Browser Client V06.30.03.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Portal Desktop Client V06.30.03.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Portal Server V06.30.03.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Services User Interface Extensions V06.30.03.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Enterprise Services User Interface V06.30.03.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Tivoli Performance Analyzer V06.30.03.00 @ Linux x86_64 R2.6, R3.0 (64 bit)
Warehouse Proxy V06.30.03.00 @ Linux x86_64 R2.6, R3.0 (64 bit)

Product packages are available for this operating system and component support categories:

1) IBM Tivoli Monitoring components for this operating system
2) Tivoli Enterprise Portal Browser Client support
3) Tivoli Enterprise Portal Desktop Client support
4) Tivoli Enterprise Portal Server support
5) Tivoli Enterprise Monitoring Server support
6) Other operating systems

Type the number or type “q” to quit selection
[ number “1” or “IBM Tivoli Monitoring components for this operating system” is default ]: 2

You selected number “2” or “Tivoli Enterprise Portal Browser Client support”

Is the selection correct [ 1=Yes, 2=No ; default is “1” ] ? 1

The following application supports are available for installation:

1) Agentless Monitoring for AIX Operating Systems V06.30.03.00
2) Agentless Monitoring for HP-UX Operating Systems V06.30.03.00
3) Agentless Monitoring for Linux Operating Systems V06.30.03.00
4) Agentless Monitoring for Solaris Operating Systems V06.30.03.00
5) Agentless Monitoring for Windows Operating Systems V06.30.03.00
6) Monitoring Agent for Linux OS V06.30.03.00
7) Monitoring Agent for UNIX Logs V06.23.05.00
8) Monitoring Agent for UNIX OS V06.30.03.00
9) Monitoring Agent for Windows OS V06.30.03.00
10) Monitoring Agent for i5/OS V06.30.03.00
11) Summarization and Pruning Agent V06.30.03.00
12) TEC GUI Integration V06.30.03.00
13) Tivoli Performance Analyzer V06.30.03.00
14) Universal Agent V06.23.05.00
15) Warehouse Proxy V06.30.03.00
16) all of the above

Type your selections here: 16

The following products will be installed:

Agentless Monitoring for AIX Operating Systems V06.30.03.00
Agentless Monitoring for HP-UX Operating Systems V06.30.03.00
Agentless Monitoring for Linux Operating Systems V06.30.03.00
Agentless Monitoring for Solaris Operating Systems V06.30.03.00
Agentless Monitoring for Windows Operating Systems V06.30.03.00
Monitoring Agent for Linux OS V06.30.03.00
Monitoring Agent for UNIX Logs V06.23.05.00
Monitoring Agent for UNIX OS V06.30.03.00
Monitoring Agent for Windows OS V06.30.03.00
Monitoring Agent for i5/OS V06.30.03.00
Summarization and Pruning Agent V06.30.03.00
TEC GUI Integration V06.30.03.00
Tivoli Performance Analyzer V06.30.03.00
Universal Agent V06.23.05.00
Warehouse Proxy V06.30.03.00

Are your selections correct [ 1=Yes, 2=No ; default is “1” ] ? 1

… installing “Agentless Monitoring for AIX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Agentless Monitoring for AIX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Agentless Monitoring for AIX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support.
… Agentless Monitoring for AIX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “Agentless Monitoring for HP-UX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Agentless Monitoring for HP-UX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Agentless Monitoring for HP-UX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support.
… Agentless Monitoring for HP-UX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “Agentless Monitoring for Linux Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Agentless Monitoring for Linux Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Agentless Monitoring for Linux Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support.
… Agentless Monitoring for Linux Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “Agentless Monitoring for Solaris Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Agentless Monitoring for Solaris Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Agentless Monitoring for Solaris Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support.
… Agentless Monitoring for Solaris Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “Agentless Monitoring for Windows Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Agentless Monitoring for Windows Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Agentless Monitoring for Windows Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support.
… Agentless Monitoring for Windows Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “Monitoring Agent for Linux OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Monitoring Agent for Linux OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Monitoring Agent for Linux OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support.
… Monitoring Agent for Linux OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “Monitoring Agent for UNIX Logs V06.23.05.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Monitoring Agent for UNIX Logs V06.23.05.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Monitoring Agent for UNIX Logs V06.23.05.00 for Tivoli Enterprise Portal Browser Client support.
… Monitoring Agent for UNIX Logs V06.23.05.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “Monitoring Agent for UNIX OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Monitoring Agent for UNIX OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Monitoring Agent for UNIX OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support.
… Monitoring Agent for UNIX OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “Monitoring Agent for Windows OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Monitoring Agent for Windows OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Monitoring Agent for Windows OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support.
… Monitoring Agent for Windows OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “Monitoring Agent for i5/OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Monitoring Agent for i5/OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Monitoring Agent for i5/OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support.
… Monitoring Agent for i5/OS V06.30.03.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “Summarization and Pruning Agent V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Summarization and Pruning Agent V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Summarization and Pruning Agent V06.30.03.00 for Tivoli Enterprise Portal Browser Client support.
… Summarization and Pruning Agent V06.30.03.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “TEC GUI Integration V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “TEC GUI Integration V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component TEC GUI Integration V06.30.03.00 for Tivoli Enterprise Portal Browser Client support.
… TEC GUI Integration V06.30.03.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “Tivoli Performance Analyzer V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Tivoli Performance Analyzer V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Tivoli Performance Analyzer V06.30.03.00 for Tivoli Enterprise Portal Browser Client support.
… Tivoli Performance Analyzer V06.30.03.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “Universal Agent V06.23.05.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Universal Agent V06.23.05.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Universal Agent V06.23.05.00 for Tivoli Enterprise Portal Browser Client support.
… Universal Agent V06.23.05.00 for Tivoli Enterprise Portal Browser Client support initialized.

… installing “Warehouse Proxy V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”; please wait.

=> installed “Warehouse Proxy V06.30.03.00 for Tivoli Enterprise Portal Browser Client support”.
… Initializing component Warehouse Proxy V06.30.03.00 for Tivoli Enterprise Portal Browser Client support.
… Warehouse Proxy V06.30.03.00 for Tivoli Enterprise Portal Browser Client support initialized.

Do you want to install additional products or product support packages [ 1=Yes, 2=No ; default is “2” ] ? 1

Product packages are available for this operating system and component support categories:

Type the number or type “q” to quit selection
[ number “1” or “IBM Tivoli Monitoring components for this operating system” is default ]: 3

You selected number “3” or “Tivoli Enterprise Portal Desktop Client support”

Is the selection correct [ 1=Yes, 2=No ; default is “1” ] ? 1

The following application supports are available for installation:

Type your selections here: 16

The following products will be installed:

Are your selections correct [ 1=Yes, 2=No ; default is “1” ] ? 1

… installing “Agentless Monitoring for AIX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Agentless Monitoring for AIX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Agentless Monitoring for AIX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support.
… Agentless Monitoring for AIX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “Agentless Monitoring for HP-UX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Agentless Monitoring for HP-UX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Agentless Monitoring for HP-UX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support.
… Agentless Monitoring for HP-UX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “Agentless Monitoring for Linux Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Agentless Monitoring for Linux Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Agentless Monitoring for Linux Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support.
… Agentless Monitoring for Linux Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “Agentless Monitoring for Solaris Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Agentless Monitoring for Solaris Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Agentless Monitoring for Solaris Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support.
… Agentless Monitoring for Solaris Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “Agentless Monitoring for Windows Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Agentless Monitoring for Windows Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Agentless Monitoring for Windows Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support.
… Agentless Monitoring for Windows Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “Monitoring Agent for Linux OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Monitoring Agent for Linux OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Monitoring Agent for Linux OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support.
… Monitoring Agent for Linux OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “Monitoring Agent for UNIX Logs V06.23.05.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Monitoring Agent for UNIX Logs V06.23.05.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Monitoring Agent for UNIX Logs V06.23.05.00 for Tivoli Enterprise Portal Desktop Client support.
… Monitoring Agent for UNIX Logs V06.23.05.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “Monitoring Agent for UNIX OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Monitoring Agent for UNIX OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Monitoring Agent for UNIX OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support.
… Monitoring Agent for UNIX OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “Monitoring Agent for Windows OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Monitoring Agent for Windows OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Monitoring Agent for Windows OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support.
… Monitoring Agent for Windows OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “Monitoring Agent for i5/OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Monitoring Agent for i5/OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Monitoring Agent for i5/OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support.
… Monitoring Agent for i5/OS V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “Summarization and Pruning Agent V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Summarization and Pruning Agent V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Summarization and Pruning Agent V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support.
… Summarization and Pruning Agent V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “TEC GUI Integration V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “TEC GUI Integration V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component TEC GUI Integration V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support.
… TEC GUI Integration V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “Tivoli Performance Analyzer V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Tivoli Performance Analyzer V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Tivoli Performance Analyzer V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support.
… Tivoli Performance Analyzer V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “Universal Agent V06.23.05.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Universal Agent V06.23.05.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Universal Agent V06.23.05.00 for Tivoli Enterprise Portal Desktop Client support.
… Universal Agent V06.23.05.00 for Tivoli Enterprise Portal Desktop Client support initialized.

… installing “Warehouse Proxy V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”; please wait.

=> installed “Warehouse Proxy V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support”.
… Initializing component Warehouse Proxy V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support.
… Warehouse Proxy V06.30.03.00 for Tivoli Enterprise Portal Desktop Client support initialized.

Do you want to install additional products or product support packages [ 1=Yes, 2=No ; default is “2” ] ? 1

Product packages are available for this operating system and component support categories:

Type the number or type “q” to quit selection
[ number “1” or “IBM Tivoli Monitoring components for this operating system” is default ]: 4

You selected number “4” or “Tivoli Enterprise Portal Server support”

Is the selection correct [ 1=Yes, 2=No ; default is “1” ] ? 1

The following application supports are available for installation:

1) Agentless Monitoring for AIX Operating Systems V06.30.03.00
2) Agentless Monitoring for HP-UX Operating Systems V06.30.03.00
3) Agentless Monitoring for Linux Operating Systems V06.30.03.00
4) Agentless Monitoring for Solaris Operating Systems V06.30.03.00
5) Agentless Monitoring for Windows Operating Systems V06.30.03.00
6) Monitoring Agent for IBM Tivoli Monitoring 5.x Endpoint V06.23.05.00
7) Monitoring Agent for Linux OS V06.30.03.00
8) Monitoring Agent for UNIX Logs V06.23.05.00
9) Monitoring Agent for UNIX OS V06.30.03.00
10) Monitoring Agent for Windows OS V06.30.03.00
11) Monitoring Agent for i5/OS V06.30.03.00
12) Summarization and Pruning Agent V06.30.03.00
13) TEC GUI Integration V06.30.03.00
14) Tivoli Performance Analyzer V06.30.03.00
15) Universal Agent V06.23.05.00
16) Warehouse Proxy V06.30.03.00
17) all of the above

Type your selections here: 17

The following products will be installed:

Agentless Monitoring for AIX Operating Systems V06.30.03.00
Agentless Monitoring for HP-UX Operating Systems V06.30.03.00
Agentless Monitoring for Linux Operating Systems V06.30.03.00
Agentless Monitoring for Solaris Operating Systems V06.30.03.00
Agentless Monitoring for Windows Operating Systems V06.30.03.00
Monitoring Agent for IBM Tivoli Monitoring 5.x Endpoint V06.23.05.00
Monitoring Agent for Linux OS V06.30.03.00
Monitoring Agent for UNIX Logs V06.23.05.00
Monitoring Agent for UNIX OS V06.30.03.00
Monitoring Agent for Windows OS V06.30.03.00
Monitoring Agent for i5/OS V06.30.03.00
Summarization and Pruning Agent V06.30.03.00
TEC GUI Integration V06.30.03.00
Tivoli Performance Analyzer V06.30.03.00
Universal Agent V06.23.05.00
Warehouse Proxy V06.30.03.00

Are your selections correct [ 1=Yes, 2=No ; default is “1” ] ? 1

… installing “Agentless Monitoring for AIX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Agentless Monitoring for AIX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Agentless Monitoring for AIX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support.
… Agentless Monitoring for AIX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Agentless Monitoring for HP-UX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Agentless Monitoring for HP-UX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Agentless Monitoring for HP-UX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support.
… Agentless Monitoring for HP-UX Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Agentless Monitoring for Linux Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Agentless Monitoring for Linux Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Agentless Monitoring for Linux Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support.
… Agentless Monitoring for Linux Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Agentless Monitoring for Solaris Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Agentless Monitoring for Solaris Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Agentless Monitoring for Solaris Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support.
… Agentless Monitoring for Solaris Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Agentless Monitoring for Windows Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Agentless Monitoring for Windows Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Agentless Monitoring for Windows Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support.
… Agentless Monitoring for Windows Operating Systems V06.30.03.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Monitoring Agent for IBM Tivoli Monitoring 5.x Endpoint V06.23.05.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Monitoring Agent for IBM Tivoli Monitoring 5.x Endpoint V06.23.05.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Monitoring Agent for IBM Tivoli Monitoring 5.x Endpoint V06.23.05.00 for Tivoli Enterprise Portal Server support.
… Monitoring Agent for IBM Tivoli Monitoring 5.x Endpoint V06.23.05.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Monitoring Agent for Linux OS V06.30.03.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Monitoring Agent for Linux OS V06.30.03.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Monitoring Agent for Linux OS V06.30.03.00 for Tivoli Enterprise Portal Server support.
… Monitoring Agent for Linux OS V06.30.03.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Monitoring Agent for UNIX Logs V06.23.05.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Monitoring Agent for UNIX Logs V06.23.05.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Monitoring Agent for UNIX Logs V06.23.05.00 for Tivoli Enterprise Portal Server support.
… Monitoring Agent for UNIX Logs V06.23.05.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Monitoring Agent for UNIX OS V06.30.03.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Monitoring Agent for UNIX OS V06.30.03.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Monitoring Agent for UNIX OS V06.30.03.00 for Tivoli Enterprise Portal Server support.
… Monitoring Agent for UNIX OS V06.30.03.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Monitoring Agent for Windows OS V06.30.03.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Monitoring Agent for Windows OS V06.30.03.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Monitoring Agent for Windows OS V06.30.03.00 for Tivoli Enterprise Portal Server support.
… Monitoring Agent for Windows OS V06.30.03.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Monitoring Agent for i5/OS V06.30.03.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Monitoring Agent for i5/OS V06.30.03.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Monitoring Agent for i5/OS V06.30.03.00 for Tivoli Enterprise Portal Server support.
… Monitoring Agent for i5/OS V06.30.03.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Summarization and Pruning Agent V06.30.03.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Summarization and Pruning Agent V06.30.03.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Summarization and Pruning Agent V06.30.03.00 for Tivoli Enterprise Portal Server support.
… Summarization and Pruning Agent V06.30.03.00 for Tivoli Enterprise Portal Server support initialized.

… installing “TEC GUI Integration V06.30.03.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “TEC GUI Integration V06.30.03.00 for Tivoli Enterprise Portal Server support”.
… Initializing component TEC GUI Integration V06.30.03.00 for Tivoli Enterprise Portal Server support.
… TEC GUI Integration V06.30.03.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Tivoli Performance Analyzer V06.30.03.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Tivoli Performance Analyzer V06.30.03.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Tivoli Performance Analyzer V06.30.03.00 for Tivoli Enterprise Portal Server support.
… Tivoli Performance Analyzer V06.30.03.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Universal Agent V06.23.05.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Universal Agent V06.23.05.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Universal Agent V06.23.05.00 for Tivoli Enterprise Portal Server support.
… Universal Agent V06.23.05.00 for Tivoli Enterprise Portal Server support initialized.

… installing “Warehouse Proxy V06.30.03.00 for Tivoli Enterprise Portal Server support”; please wait.

=> installed “Warehouse Proxy V06.30.03.00 for Tivoli Enterprise Portal Server support”.
… Initializing component Warehouse Proxy V06.30.03.00 for Tivoli Enterprise Portal Server support.
… Warehouse Proxy V06.30.03.00 for Tivoli Enterprise Portal Server support initialized.

Do you want to install additional products or product support packages [ 1=Yes, 2=No ; default is “2” ] ? 2
… postprocessing; please wait.
… running /app/IBM/ITM/lx8266/cq/bin/helpmerg.sh
… finished postprocessing.
Installation step complete.
Automatic start at system initialization has been configured.
Automatic stop at system shutdown has been configured.

Do you want to secure this IBM Tivoli Monitoring installation [ 1-yes, 2-no; “2” is default ]? 2
Starting TEMS…
It can take up to ten minutes.
TEMS started…

The locale codeset (cp1252) isn’t one that perl can decode…

Leave a reply

We encountered this error while compiling a perl script:

The locale codeset (cp1252) isn’t one that perl can decode, stopped at Encode/Lo
cale.pm line 94. Compilation failed in require at LWP/UserAgent.pm line 1001.

The solution to this is to include the following use statement on the top of your script:

use Encode::Byte;

This will include the mentioned library in the complied exe file.

Perl lib version (5.20.2) doesn’t match executable ‘perl.exe’ version (5.20.1) at C:/Perl/lib/Config.pm line 62.

Leave a reply

When using Active Perl 5.20.2 and PP to compile perl files we faced the following error:

Perl lib version (5.20.2) doesn’t match executable ‘perl.exe’ version (5.20.1) at C:/Perl/lib/Config.pm line 62.
Compilation failed in require at C:/Perl/lib/Errno.pm line 8.
BEGIN failed–compilation aborted at C:/Perl/lib/Errno.pm line 8.
Compilation failed in require at C:/Perl/lib/File/Temp.pm line 17.
BEGIN failed–compilation aborted at C:/Perl/lib/File/Temp.pm line 17.
Compilation failed in require at C:/Perl/lib/Archive/Zip.pm line 11.
BEGIN failed–compilation aborted at C:/Perl/lib/Archive/Zip.pm line 11.
Compilation failed in require at -e line 228.
C:\Perl\site\bin/pp: Failed to extract a parl from ‘PAR::StrippedPARL::Static’ t
o file ‘C:\Users\zveress\AppData\Local\Temp\parlMVgYDUi.exe’ at C:/Perl/site/lib
/PAR/Packer.pm line 1158, line 1.

This apparently is a bug. The solution for us was to download and install Active Perl 5.20.1. Since this version is no longer available on the Activeperl website you can get it from download.com